Wii Usb Loader Dual Layer Games Free Download Programs

1. Wii Usb Loader Dual Layer Games Free Download Programs For Windows 7
2. Wii Usb Loader Dual Layer Games Free Download Programs Free Software
3. Wii Usb Loader Dual Layer Games Free Download Programs To Design Tombstone

This guide is no longer supportedUse ModMii for softmodding your Wii.Look here for ModMii -!Softmod ANY WiiWorks with ALL Wii's, ALL Firmwares, ALL Colors, ALL Regions.PASSWORD FOR ALL FILES: hacksden.comWARNING: You risk bricking your Wii if you fail to follow instructions properly! The bundled software comes with no warranty at all! No one but yourself is responsible for any damage done to your Wii console!Chapter 0 - Requirements. Wii with at least 350 Free Blocks of Internal Memory. All Gamecube Controllers, Memory Cards and USB Devices Removed!.

1GB - 2GB SD Card ( No More, No Less) formatted to FAT32 (If issues occur, use to format). or to unzip downloads.Chapter 1 - Installing the Homebrew Channel and BootMiiPart 1 - Loading HackMii InstallerBelow are methods for loading Homebrew Channel on your Wii Based on what firmware you have. (See this video on how to find your firmware).

If you don't know what the letters mean; U = USA, E = Europe, J = Japan, K = Korean. If you happened to have softmodded with something else and just want to get updated.

You can do this guide, starting here.NOTE: 4.3 Wii Users don't need to install iOS58 and iOS61. You can skip Steps 2-9 and just load HackMii Installer from Homebrew Channel.Backup and Format your SD Card to FAT32 (Important! Also; formatting erases all your data).1. Download and Extract to the root of your SD Card and insert your SD into the Wii.2. Start Homebrew Channel.3. Launch Multi-Mod Manager4.

Navigate down to WAD Manager and Press A.5. Press 1 then A to select all.WAD's.

This will install iOS58 and 61.6. Press any button to exit.7. Press Any Button to Exit.8. Press 2 then load 'App Manager.9. Navigate down to hackmiiinstallerv0.8 and press A to load it.Hackmii Installer will load. Continue to Part 2. Download and extract the files to the root of your SD Card and insert the SD Card into your Wii.1.

From the Menu, Go to Wii Settings - Data Management - Channels - SD. When prompted, load the boot.dol2. Multi Mod Manager will load up.3. Navigate to WAD Manager and Press A to select it.4. Press 1 then Press A and Install all wads. (IOS58 and IOS61 will install).5. Press 'any button' to exit once it's done.6.

Press 2 to load 'App Manager'7. Navigate to hackmiiinstallerv0.8 and Press A to load it.The HackMii Installer will load, carry on to Part 2.NOTE: If the boot.dol does not prompt to load, format your SD Card and try one of these alternate packs and repeat the steps: B, C, D, E. Download and extract the files to the root of your SD Card and insert the SD Card into your Wii1. Turn on your Wii, from the Main Menu, Click the SD Card Icon. When prompt, load boot.dol.2. Multi Mod Manager will load up.3.

Navigate to WAD Manager and Press A to select it.4. Press 1 then Press A and Install all wads.

(IOS58 and IOS61 will install).5. Press 'any button' to exit once it's done.6. Press 2 to load 'App Manager'7. Navigate to hackmiiinstallerv0.8 and Press A to load it. Move on to Part 2.NOTE:If the boot.dol does not prompt to load, format your SD Card and try one of these alternate packs and repeat the steps: B, C. Find Your Wii's MAC address.(Can be found by going to Wii Menu then Settings then choose Internet and then Console Settings, MAC address is on the first line).2. Format your SD Card to FAT32 (NOT OPTIONAL!)3.

Get HackMii Installer Bundle by going and entering your MAC Address and Selecting your CORRECT region on top. Also note, getting the Captcha wrong resets the page and you have to reselect your region, so if you get the Captcha wrong, be sure to re-select your region or the hack will freeze your Wii. If done right, it'll prompt you to download the HackMii bundle.4. Unzip the Downloaded files and place them the root of your SD Card.5. With your Wii off, insert your SD Card and turn on your Wii.6.

Go to the Mail Board (Envelope Icon on bottom right)7. If you don't see a red letter with a bomb on it, navigate to a different date using the '+' and '-' on your Wii Mote.8. Click on the red envelope with the Bomb.9. HackMii Installer will begin loading, move on to Part 2.NOTE: If the HackMii Installer freezes, either Step 2 failed for you, go back up and try again (use the Panasonic tool) or/and you selected the incorrect region for on the LetterBomb website. If you're not seeing the LetterBomb on your Mailboard, then you may have typed the wrong MAC Address.

Requires the Original Lego Batman game disc for your region.1. Before starting, load the game and create a save file once.2.

Download and Extract to the root of your SD Card.3. From the Wii System Menu, go to Options, then Data Management and select Save Games.4. Delete the Lego Batman save file on the Wii (Back it up if you want)5. Copy over the hacked save file for your region from the SD Card to your Wii.6. Load LEGO Batman and load up the save file you just copied7.

You will be in the Batcave, take the Elevator on the right corner to go up.8. Now in the Trophy Room, go to the upper corner and go through the door to enter Wayne Manor.9. You will be prompted to select to a character.

Select the last enabled one in the lowest row.10. Hackmii Installer will load. Move on to the next part. Requires the original Lego Indiana Jones Game Disc for your region.1.

Download and extract to the root of your SD Card.2. Play Lego Indiana Jones once and start a new game. Then go back to the Menu.3.

From the Menu, Go to Wii Settings, then Data Management, then Save games then Wii.4. Delete the Indiana Jones save file you made on the Wii (Back it up if you want).5.

Copy the Indiana PWNS Save file for your region from the SD Card to the Wii.6. Start Lego Indiana and load the Save file from Slot 1. Requires the Original Lego Star Wars Game Disc for your Region.1. Download OR and extract one to the root of your SD Card.2. Start Lego Star Wars and play it once to make a save file. Once done, exit back to the Main Menu.3. From the Menu, Go to Wii Settings, then Data Management, then Save games then Wii.4.

Delete the Lego Star Wars save file you made on the Wii (Back it up if you want).5. Copy the hacked Save file for your region from the SD Card to the Wii.6. Start up Lego Star Wars and load the first save file (Left side at 0.0%)7. Run to the right where you'll see two characters floating. Go to the area in front of them and you will see 'Return of the Jodi' pop-up. Press 'A' on your Wii Mote and boot.elf will run.8.

The HackMii Installer will load and you can continue to Part 2! Requires Original Tales of Symphonia: Dawn of the New World Game Disc for your region.1. Download and extract to the root of your SD Card.2. Load and play Tales of Symphonia: DotNW once to make save data. Then, exit back to the Wii Main Menu.3. From the Menu, Go to Wii Settings, then Data Management, then Save games then Wii.4.

Delete the Tales of Symphonia save file you made on the Wii (Back it up if you want).5. Go to SD Card and copy the hacked Save file for your region from the SD Card to the Wii.6. Start back Tales of Symphonia: Dawn of the New World and load the new save file.7. Once it starts, press '+' on the Wii Mote to open the Menu.8. Navigate down to Status and press A.9. Scroll down to the second character named giantpune and highlight him and press A.10. HackMii Installer should load and you can continue to Part 2.

Wii Usb Loader Dual Layer Games Free Download Programs For Windows 7

Requires Original YU-GI-OH 5D Wheelie Breaker Game Disc.DownloadsUSA Wii -JAPAN Wii -EUROPE PAL 50HRZ -EUROPE PAL 60HRZ -1. Extract downloaded Pack to root of your SD Card.2. Start and play YU-GI-OH 5D Wheelie Breaker at least once so it can create a save file. Then go back to the Wii Main Menu.3.

From the Menu, Go to Wii Settings, then Data Management, then Save games then Wii.4. Delete the Yu-Gi-Oh save file you made on the Wii (Back it up if you want).5. Go to SD Card and copy the hacked Save file for your region from the SD Card to the Wii.6.

Start back YU-GI-OH 5D Wheelie Breaker and load the new save file.7. HackMii Installer should load. Move on to the next step.Part 2 - Install Homebrew Channel and BootMii1.

Wii Usb Loader Dual Layer Games Free Download Programs Free Software

Read the Scam Warning and wait patiently for the 'Press 1' to appear (can take up to two minutes), when it does Press '1' on the Wii Mote.2. Select 'Install the HomeBrew Channel'3.

Select 'Install BootMii as Boot2' (boot2 may not be available, BootMii as iOS installs automatically)4. Select 'Prepare SD Card'Part 3 - Make a NAND Backup (MANDATORY)Once back in the System Menu, you will now have a new channel called the Homebrew Channel. Before we go further in, time to make a system backup.1. Select Homebrew Channel from the Main Menu and then select Start.2. In the Homebrew Channel, Press 'Home' on your WiiMote.3.

Now, select 'Launch BootMii'.4. BootMii will load, to make a NAND Backup, use the keys (Power = Right, Eject = Left, Reset = Select) on your console and press: Power, Power, Power, Reset, Reset (or you can use a GC Controller to navigate) to start making a NAND Backup.5. Once done, exit BootMii and return to Homebrew Channel.6. Before continuing, remove your SD Card, insert it into your PC and move these files to a safe place on your computer. These are very important backup files!. sd:bootmii (Copy Entire Folder). sd:nand.bin.

sd:key.binChapter 2 - Hacking Your WiiBefore continuing, FORMAT YOUR SD CARD AGAIN. That's right, format it again to FAT32.

This isn't optional! Before proceeding, make sure you read the Requirements above and read this Chapter over and over!1. Download the ModPack for the Region of Your Wii:USA -EUROPE -JAPAN -KOREA -Unzip the the mod packs onto the root of your SD Card so your SD Card has a set of various folders and file in it's root directory.2. Download the and unzip it to the root of your SD Card again. If asked, overwrite any files!3. Next if you want to update your Wii's iOS, Download the and unzip it to the root of your SD Card (4.3 Users don't need this!), and (OPTIONALLY) to update the Wii Shop Channel, download the and unzip it into the root of your SD Card. If asked, overwrite any files.

(You'll be using these to update your iOS and Channels a few steps later). These two parts are if you chose to download the iOS Update and/or Wii Shop Channel Update Packs above. Note, users running 4.3 already do not need to do these.Updating All IOSa. Once done above, press B to go back a folder, then navigate to the folder called 'IOS-Update' and press A.b. Now, Press '1' then press A, this install all files at once. Make sure ALL 25 WADs install without error (very important again!).c.

Press Any Button to Continue.NOTE: These iOS are used by Wii Channels and DVD Games loaded on the Disc Channel, USB Loading doesn't use them but it's useful to keep your Wii Up-to-date.Updating Wii Shop Channela. Once done above, press B to go back a folder, then navigate to the folder called 'Channels' and press A.b. Now, Press '1' then press A, this install all files at once. Make sure ALL WADs install without error (very important again!).c. Press Any Button to Continue.Once done this part, move on6.

Press 2 to load the MMM App Manager, once in there, select and launch the ' HomeBrew Channel Loader'. You should now be back in the Homebrew Channel. Wii Region ChangeYou will be changing to the region you installed above.You can change to any region you like, even Korean.Warning failure to complete this step could result in a semi brick, which could be unrecoverable- especially for KOREAN Wiis changing to another region. Make sure you do don't restart the Wii until thesoftmod is complete.This is most common when changing Korean/Japan wiis to USADO NOT RESTART THE WII UNTIL THIS PROCESS IS COMPLETEWii Shop Users-If you use the Wii Shop channel, you must go into the wii shop and delete your account before starting chapter 2 of this guide. If you don't the wii shop will error.Supported TV display-This is importantEnsure that your tv supports the display of the region you are changing to. If your TV does not support PAL, don't region change to PAL.

Same goes for NTSC. If your TV does not support your selected display, you won't be able to seethe wii screen anymore.From the HBC-Launch ARCmod06OfflineSelect IOS236 - press ARead the WARNING- press 1You will see this error at the top screen 'WARNING: AREA: SysMenu MISMATCH!' This means your semi-bricked- which we are going to fix.Use the wiimote, go down to-'system menu 4.1 installer'Select 'System Menu Region'Change the region to USA (or Europe or Jap or KOREAN)Go down to 'Auto set from System Menu Region' -Press A'WARNING: AREA: SysMenu MISMATCH!'

Error will go away,make sure it goes awayDo not install system menu 4.1Verify that your settings are correctExit to the Homebrew Channel(do not restart)HBC will loads7. Now from Homebrew Channel, select and launch ' Priiloader'. This will bring you to Priiloader installer, read the warning, then press '+' or 'A' on the Wii Mote. Once done, you should be back in the Homebrew Channel.8. Hold reset and keep holding reset until Priiloader loads. (If the Wii freezes, hold power for 10 seconds then try again, If Multi-Mod Manager loads, delete the 'bootmii' folder from your SD Card).9a.

Wii Usb Loader Dual Layer Games Free Download Programs To Design Tombstone

Navigate to ' System Menu Hacks' and Press A. From there, enable any hacks you'd like, I recommend enabling the following; Block Disk Updates, Block Online Updates, Remove Diagnostic Disc Check, Move Disc Channel. If you don't know what any of the other hacks do, then you shouldn't use it!9b. Navigate to Save Settings then Press A. Then, press B to go back to the Priiloader Menu.9c. Select 'Load/Install file' then Install USBLoaderCFG.dolYour Wii is now able to block both disc and online updates, move around the Disc Channel and even auto-boot your USB Loader if you like.9d. In the Priiloader Main Menu, you can set your Wii to autoboot the regular System Menu, Homebrew Channel, Priiloader or the USB Loader (great for kids!).

Simply set 'Return To' to Autoboot and the Autoboot option to whatever you want it start up to then it'll do so. For example, if you set it to Autoboot: 'Installed File', it'll automatically load-up CFG USB Loader on boot.Chapter 3 - The Final StepFormat your SD Card for one last time, again, you must do this. Download and Extract this to the root of your SD Card.Boot up your Wii Main Menu and you will see the following now installed;CFG USB Loader - This is a Forwarder and loads a USB Loader off an SD Card or USB Hard Drive.Backup Disc Channel - This is an Autobooting mod of Neogamma, which will autoboot discs.

You can press any button while the game is loading to access the menu. It's a full fledged channel so doesn't boot from an SD or USB.Backup Homebrew Channel - You will see a Channel with Black Waters named Backup HBC. This is installed as a backup to run homebrew should your Wii get damaged/brick and you need it. Unless you need to use it, do NOT use it. Never uninstall this wad (Title ID 'MAUI').

You can keep it on your Wii or on the SD Card but never uninstall it. If you'd like, you can move it to the far right of the main menu (by holding B then selecting a channel by Pressing A). It's installed as a safety measure should ever need to use it.Next, there are some helpful apps on your SD Card, that includes Homebrew Browser, WiiMC, CFG USB Loader and SaveGame Manager GX. Wii Homebrew also has many more apps to try. All Apps are installed to your SD Card or you can keep them on your FAT32 USB Flash Drive (no NTFS support ).

Apps are installed like this: SD:appsappnameboot.dol or they won't load. CIOS - These are what are used to load your backups and you have quiet a few to choose from. This setup should be good enough to load any game to date. Most loaders like USB Loader GX, WiiFlow and Neogamma now just auto-detect what cIOS a game needs. However, if you need to know what's installed.Hermes: cIOS20257-v5.1r rodries modHermes: cIOS22238-v4, cIOS22337-38-v4, cIOS22457-v5.1rWanikoko: cIOS245base-55-v21d2x7, cIOS246base-53-v21d2x7, cIOS247base-37-v21d2x7, cIOS248base-56v21d2x7, cIOS249base-38v21d2x7, cIOS250base-57v21d2x7, cIOS251base58-v21d2x7CFG USB Loader has been set to use cIOS248Base-56v21d2x7.

This cIOS should load almost any game but sometimes there are some games that require a different ciOS, if so, you can ask and when someone gives you an answer, you can just set settings for that game alone to load a specific cIOS.Older Legacy Apps are covered since they'll use iOS24938v21d2x7 just fine.Loading From DiscNew wii dvd drives will not read backup discs, no mater what. Does my wii load dvds?

If it is new, probably not. Discs suck anyway, usbloading is much better. Disks must be loaded from a disk loader, like the neogamma channel installed on your wii. They will not work from the disk channel, unless you installed darkcorp. GC backups can be loaded from the disc channel without issue, if your drive reads burned dvds.

Be sure to burn your dvds good and prooper. Burn them with ImgBurn, slowly 1-4x, set the 'Layer Break' to 2084960 for dual layer games, on verbatim dvd -r. Other discs may work, but these are considered the best.Loading From USBLoading from USB is the ultimate option and it works on ALL Wii's. It requires a compatible HDD and needs it formatted to either FAT32, NTFS or WBFS but I'd recommend FAT32 or secondarily NTFS but it's up to you. I'd recommend formatting it to FAT32, then use Wii Backup Manager to copy your ISO's from your PC to your HDD as wbfs files (It can download cover art if you like). You can also use the USB Loader on your Wii to rip games from your original Discs onto the Hard Drive.1. Get a compatible Hard Drive2.

Format it to FAT32 with3. Copy games from your PC to your Hard Drive using or you can rip your original DVDs to your Hard Drive using the Wii USB Loader.

Format your SD card on your computer. Insert your SD card into your computer's card reader. If your computer doesn't have a card reader, you'll need a USB reader. Format the card in FAT32 format by doing the following:. Windows - Open Windows Explorer ( ⊞ Win+ E).

Right-click on your SD card and select 'Format.' Choose 'FAT32' from the 'File system' menu and click 'Format.' . Mac - Open the Disk Utility from the Utilities folder. Select your SD card, then click the 'Erase' button. Select 'FAT' from the 'Format' menu.

Format an external drive or flash drive as FAT32. This format will allow you to save Wii and GameCube games. The games you rip or download will be stored on this drive. Windows - Download FAT32 Format from ridgecrop.demon.co.uk/index.htm?guiformat.htm. While you can use the Windows system formatting tools, they won't be able to format drives larger than 32 GB. If you have a larger drive, the FAT32 Format tool will allow you to format the disk. Run the utility, select your external drive, and click 'Start.'

This will erase everything on the drive. Mac - Plug your external drive in and open the Disk Utility. You can find this in your Utilities folder. Select your external drive and click the 'Erase' button.

Select 'FAT32' from the 'Format' menu.